Detailed instructions on how to assemble, dismantle and fill your Squirrel Buster feeders. Find your feeder below and click the orange bar for further information.
Squirrel Buster Classic - click to view
Read on for information on how to disassemble the Squirrel Buster Mini Feeder
1. Push down and turn the lid to release.
2. Remove the lid from the feeder.
3. Pull the yellow cap from the centre of the feeder.
4. Disconnect the hanger cable from the feeder.
5. Remove the nut from underneath your feeder.
6. Pull out the tube from the centre of the feeder.
7. Finally, push the buttons. You should now be able to remove the seed tube..
Your Squirrel Buster Classic consists of the below parts. To request any spare parts, please contact Jacobi Jayne directly on 0800 072 0130 with the product number.
Squirrel Buster Finch - click to view
Read on for information on how to disassemble the Squirrel Buster Finch Feeder
1. To remove the lid, push down and turn counter clockwise.
2. Lift the cover up to remove it.
3. Pull the yellow cap in the middle of the tube up.
4. Disconnect the hanger cable.
5. Remove the nut at the bottom of the feeder.
6. Lift the tube.
7. Push the buttons to fully remove the tube.
8. That's it! You can now remove the tube.
Your Squirrel Buster Finch consists of the below parts. To request any spare parts, please contact Jacobi Jayne directly on 0800 072 0130 with the product number.
Squirrel Buster Plus - click to view
Read on for information on how to assemble the Squirrel Buster Plus Feeder
1. Insert the shroud over the bottom section of your feeder.
2. Screw the wing nut on (clockwise).
3. Insert the skirt.
4. Insert the seed tube.
5. Attach and latch the hanger cover over the top of the feeder.
Read on for information on how to disassemble the Squirrel Buster Plus Feeder
1. Disconnect the hanger from the feeder.
2. Disconnect and remove the seed tube.
3. Remove the outer skirt component.
4. Remove the bottom wing nut (counter clockwise).
5. Finally, remove the shroud that slots over the bottom section of the feeder.
Your Squirrel Buster consists of the below parts. To request any spare parts, please contact Jacobi Jayne directly on 0800 072 0130 with the product number.
Squirrel Buster Peanut - click to view
Read on for information on how to fill the Squirrel Buster Peanut Feeder
1. Place your feeder on a level surface such as a table.
2. Lift the tube off the top of the feeder.
3. Unhook the hanger and tube from the top of the feeder.
4. Lift the metal cage off the peanut tube.
5. Fill the feeder from the top.
Read on for information on how to disassemble the Squirrel Buster Peanut Feeder
1. Place your feeder on a level surface such as a table.
2. Lift the tube off the top of the feeder.
3. Unhook the hanger and tube from the top of the feeder.
4. Lift the metal cage off the peanut tube.
5. Unscrew the stand from the bottom of the tube.
6. Slide the stand out from the center of the feeder tube.
Your Squirrel Buster Peanut consists of the below parts. To request any spare parts, please contact Jacobi Jayne directly on 0800 072 0130 with the product number.
Squirrel Buster Seed - click to view
Read on for information on how to assemble the Squirrel Buster Feeder
1. Place the metal shroud over the feeder (you might want to fill it first!)
2. Take the hanger and insert the hooked end onto the top of the feeder.
3. Slide the green metal tube over the hanger hook.
4. That's it! Simply hang your feeder.
Read on for information on how to disassemble the Squirrel Buster Feeder
1. Lift up the metal tube over the hanger.
2. Unhook the feeder.
3. Lift the metal cage off the seed tube.
4. That's it! You can now either fill your bird feeder with seed, or clean it.
Your Squirrel Buster consists of the below parts. To request any spare parts, please contact Jacobi Jayne directly on 0800 072 0130 with the product number.
Squirrel Buster Mini - click to view
Read on for information on how to assemble the Squirrel Buster Mini Feeder
1. Add seed to your feeder, then slip the metal cover over the top of the seed tube.
2. Take the hanger and insert the hooked end onto the top of the feeder.
3. Slide the green metal tube over the hanger hook.
4. That's it! Simply hang your feeder.
Read on for information on how to disassemble the Squirrel Buster Mini Feeder
1. Lift up the metal tube over the hanger.
2. Unhook the feeder.
3. Lift the metal cage off the seed tube.
4. That's it! You can now either fill your bird feeder with seed, or clean it.
Your Squirrel Buster Mini consists of the below parts. To request any spare parts, please contact Jacobi Jayne directly on 0800 072 0130 with the product number.
If you've not yet purchased a squirrel buster feeder, or if you're looking to buy another, click the button below to view our range.
Subscribe to our emails and you'll be the first to hear about discounts, sales and new products, as well as getting 20% off your first order over £30.
